刘本东博士,副教授,硕士生导师

一、简介

刘本东,1976年生,工学博士,北京工业大学机电学院机械设计及理论学科部,博士,副教授,硕士生导师。

作为项目负责人主持1项国家自然科学基金项目和1项教育部博士点基金项目,参与国家科技部重大专项和北京市科技成果落地项目等多项科研项目。申请专利20项,已授权发明专利3项,实用新型专利7项,发表学术论文30余篇,其中被SCIEI收录20余篇。

二、主要研究方向

1.微执行器(microactuators

2.微传感器(microsensors

3. 微流控技术和生物微机电(microfluidics and bioMEMS

4.微机电系统及微加工工艺(MEMS and micro fabrication

5.机电装备应用研究

三、讲授课程

1.机械原理(本科生)

2.现代设计方法(本科生)

3.微机电系统技术(研究生)

四、近期的科研项目

1.国家自然科学基金,基于微平面电感的油液中金属磨粒在线检测机理研究,项目负责人。

2.教育部博士点基金,电磁感应热发泡式微喷工作机理研究,项目负责人。

3.企业委托项目,热压型卷材自动铺设机的研究开发,项目负责人。

4.科技部重大专项,特殊晶体材料单点金刚石飞刀切削超精密机床,第二参加人。

5.科技部重大专项,大直径端面透镜模具加工超精密机床,第二参加人。

6.北京市教委项目,汽车永磁缓速器产业化项目,第二参加人。

7.北京市科委科技计划项目,汽车永磁液冷缓速器规模制造技术,第二参加人。

五、主要科研论文和专利

27)Bendong Liu, Yuepeng Hou, Desheng Li and Jiahui Yang. A thermal bubble micro-actuator with induction heating. Sensors and Actuators A. 222(2015), pp 8-14.

26)Bendong Liu, Fangzhou Zhang, Desheng Li, and Jiahui Yang. Research on the Influence of Excitation Frequency on the Sensitivity in Metal Debris Detection with Inductor Sensor. Advances in Mechanical Engineering. Volume 2014, Article ID 790615.

25)Yuepeng Hou, *Bendong Liu, Jiahui Yang. Research on a large power thermal bubble micro?ejector with induction heating. Microsyst Technol. DOI 10.1007/s00542-014-2367-5, Published online:18 November 2014.

24)Zhang, Fangzhou, Liu, Bendong; Su, Yanqiang; Yang, Jiahui. Research on the detection of metal debris with micro inductive sensor embedded in lubricant. Journal of Chemical and Pharmaceutical Research. v 6, n 7, p 2249-2254, 2014

23)Hou, Yuepeng Liu, Bendong; Yang, Jiahui; Cai, Ping. The design and realization of micro induction heater for the thermal bubble generation. Key Engineering Materials. v 609-610, p 1239-1247, 2014,

22)Bendong Liu, Fangzhou Zhang, Yude Wu, and Desheng Li. Research on the Detection of Metal Debris with Microplane Inductance Sensor. Advances in Mechanical Engineering. Volume 2013, Article ID 484710, 8 pages. 2013.

21)Fangzhou Zhang, Bendong Liu, Yude Wu and Desheng Li. The Simulation Research of Detecting Metal Debris with Different Shape Parameters of Micro Inductance Sensor. Advanced Materials Research. Vols. 791-793. pp 861-865. (2013) (EI:20134516955407)

20)Yude Wu, Bendong Liu and Desheng Li. Study on the Inductance of Micro Planar Coil for Eddy Current Detection. Proceedings of 2012 International Conference on Mechanical Engineering and Material Science (MEMS 2012).2012.12. pp 96-99. Shanghai.

19)Bendong Liu, Jiahui Yang and Yude Wu. Study on the Air Damping of the Movable Armature. Key Engineering Materials. Vols. 562-565. pp 1397-1401. (2013) (EI:20133816744831)

18)Yuepeng Hou and Bendong Liu. The Design and Realization of Micro Induction Heater for the Thermal Bubble Generation. 2013 International Conference on Micro-Nano Technology.2013.11.Tianjin.2013. EI

17) Bendong Liu and Desheng Li. Design and Simulation of a Micro Induction Heater. Information: An International Interdisciplinary Journal Vol.13, No.6, November, 2010,pp:2145-2152.SCI: 000208242700026 IDS: V21YK

16) Bendong Liu, Desheng Li and Gaofei Deng. The design and simulation of a switch reluctance motor for the transmission auxiliary start up and brake. Advanced Materials Research,Vol. 298 (2011) pp 220-225. (EI20113514274531)

15) Bendong LiuWeihan Zhang and Jiahui Yang. The Research of an Energy Recovery Retarder with SRM Structure.2011 IEEE International Conference on Mechatronics and Automation . pp:1877-81, 2011.EI20114614521502

14)Weihan Zhang, Bendong Liu and Desheng Li. The control system research of paving machine for the modified asphalt coiled material.2011 IEEE International Conference on Mechatronics and Automationpp:2433-2437.EI20114614521659

13) 刘本东, 焦冰锋, 李德胜. 一种感应微加热器的设计[J],仪器仪表学报.2010,29(4):48-51.

12) Liu Bendong and Li Desheng. The mathematical model and simulation for a micro electromagnetic relay[C].International Conference on Mechatronics and Automation, 2009. ICMA 2009. Page(s): 4720-4724. (EI收录,ID:20100912743364)

11) 刘本东,李德胜. 一种单稳态微电磁继电器的研究[J]. 光学精密工程. 2007, 15(04):543-548.EI 收录, ID:072310642537.

10) Liu Bendong, Li Desheng. The Research on Sacrificial Layer in the Fabrication of Micro Electromagnetic Relay[J]Advanced Materials Research2009 年,60-61160-164 (EI 收录, ID: 10657760).

9) Bendong Liu, DeSheng Li and Xiaobo Yang. Design and Fabrication of a Micro ElectromagneticActuator[C]. Proceedings of the 1st IEEE International Conference on Nano/Micro Engineered and Molecular Systems. Zhuhai, China. 2006: 353-356 (EI收录, ID: 9473983) .

8) Li Desheng Liu Bendong. Research on Microelectromagnetic relays[J]. Frontiers of Mechanical Engineering in China. 20061:111-114.

7)Liu Bendong and Li Desheng. Design and fabrication of a Micro Electromagnetic Relay[C]. 2006 IEEE International Conference on Mechatronics and Automation. Luoyang, China. 2006: 480-484 (EI 收录, ID: 071710567310).

6) Liu B.D, Guan J.L and Li DSH. The Experimental Study on Lapping and Polishing of Metal Micro-Coil Based on Silicon Wafer[J]. Key Engineering Materials. 2006,305:422-425 (SCI 收录,ID: 000236491500088) .

5) 刘本东, 李德胜, 郭学平. 一种微感应加热器(发明专利). ZL 200910083734.X.

4) 刘本东, 李德胜. 一种具有净化功能的小型电镀槽(实用新型). ZL 200920277862.3.

3) 刘本东, 李德胜, 常文博. 无阀热驱动泵(微小型泵)(实用新型). ZL 200920218978.x.

2) 刘本东, 李德胜. 一种沥青卷材自动铺设机(发明专利). ZL 200910081433.3.

1)刘本东, 李德胜. 一种用于检测油液中金属磨粒的微电感传感器(实用专利). ZL 201120052375.4.

六、通讯方式

通信地址:北京工业大学机电学院,邮编:100124
电话: (010)67396187
E-mail to: liubendong@bjut.edu.cn

七、国际交流

主要国际合作交流单位:MEMS Lab of Akron UniversitySensors and Microactuators Learning Lab of University at Buffalo,State University of New York